INLET FILL HOSE EXTRA LONG COLD 5M
- WASHING MACHINE/DISHWASHER INLET FILL HOSE 5m (500CM) LONG
- FIT THIS HOSE WITHOUT HAVING TO JOIN 2 HOSES TOGETHER TO ACHIEVE LENTGH
- AVOID UNNECESSARY LEAKS
- HIGH QUALITY HOSE COMPLETE WITH WASHERS
- Reviews (0)
A inlet fill hose extra long cold 5m. Let cicshop help you make it easier if your appliance cannot reach the inlet tap under your kitchen units. A cost effective product that is easy saves time joining 2 hoses together also reducing the chance of leaks. It can be quite expensive to have taps moved from one place to another so why not just fit this longer inlet fill hose. Being able to replace your existing hose straight away will remove the stress of piles of laundry or pots and pans. The hose is 5 meters or 500cm approximately in length. It has one straight end and one 90 degree end complete with 3/4 washers. A Inlet fill hose fitting most manufacturers brands of cold fill washing machine and dishwashers. One of the longest inlet hoses available used and tested by the trade.
Important! before using your new inlet fill hose
Please never use grips to tighten up the plastic ends that fit onto the tap or rear of appliance. This can damage the ends and damage the sealing process. Always tighten hose ends by hand into position. Always check for leaks before pushing appliance back into position.When removing an inlet fill hose from your inlet tap you must refit a brass blanking cap to the inline tap. Click this link https://cicshop.co.uk/product/34-brass-blanking-cap-washer/. A blanking cap can prevent leaks or water damage while there is no appliance fitted. Please use this inlet fill hose on cold fill appliances only.Never connect this inlet fill hose to a hot fill tap. Finally please make sure not to push appliance over or onto the hose as it can affect water flow. Also check you do not kink the waste hose pushing you appliance back into position Are you Still unsure? then just contact your local appliance engineer or plumber to complete installation for you.